HomeCust Casecustom foamNewContact
Header
browse by categories:
Custom Products:
 

rackmount cases: Superior protection for sensitive electronics

Canyonwest

GUARANTEED
LOWEST PRICE

SKB Roto Shock Rack Cases - 28" Deep

  • Accommodates Dell and Compaq deep servers
  • Recessed heavy-duty twist latches
  • Military Spring-Loaded Handles
  • Stacks securely with the wheels on or off
  • Locking casters included
  • Pressure relief valve
  • Adjustable elastomer shock absorbers
  • Resistant to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).

The SKB 28" Deep Roto Shock Rack Case is a roto-molded shock rack that is made to fit Dell and Compaq deep servers. Case comes standard with square mounting holes to accept Dell and Compaq mounting hardware. Accommodates "Versa-rail" and "Rapid-rail" pull-out systems. Optional mounting rails convert to 3/16" threaded or 7/32" through-holes or square cagenut windows (Call).

This Heavy Duty Shockrack system includes a revolutionary new patent pending Adjustable Rail Conversion System. This ARCS technology allows the user to adjust the rack width up to 0.5 inches on each side. This means that the standard 19" rack space is adjustable from 18" to a maximum of 20" wide.

Compound hinge system allows the lid to swing out and completely around to lie flat against the main body of the case, or you can go lid-less with an effortless lift motion and reinstalled with the same ease in seconds.

Front and rear lids are designed to protrude into the base of the case approximately 1" making the case incredibly strong. Doors are fitted with rubber gaskets for water resistant protection. Significantly fewer latches than most competition allows for rapid deployment in an up-right configuration -- even when stacked. Meets most ATA and military specifications.

The new SKB shock-rack system stacks securely with the wheels on or off and this revolutionary design is also the only shock rack that will open front and back while stacked. Other features include black powder coated stainless steel latches, removable 4" casters, eight elastomeric shock absorbers (load range of 40 to 150 lbs.) with provisions to add additional shocks for an extended payload range to 300 pounds (3SKB-SA), gasketed doors and pressure relief valve.

Standard 19” rack width per EIA standards. Depth front to rear rail is 28.75" and each lid is 4.5" deep. A standard Rack Unit is 1.75 inches (4.445 cm) in height.

Million Mile Warranty: Every SKB hardshell case is guaranteed forever. That means, If your case breaks, it will be repaired or replaced at no cost to you. SKB cases have been on the road for 30 years, standing up to the toughest military and industrial conditions.

ASK ABOUT QUANTITY DISCOUNTS

Part # Description HxWxD (ID) Weight Price $ Buy
4U Roto Shock Rack
7" x 19" x 28.75"
61.5 lbs..
1329.99
6U Roto Shock Rack
10.5" x 19" x 28.75"
68 lbs.
1409.99
8U Roto Shock Rack
14" x 19" x 28.75"
78 lbs.
1444.99
10U Roto Shock Rack
17.5" x 19" x 28.75"
81 lbs.
1584.99
Accessories
Small Accessory Pocket
20" x 10" x 3"
4 lbs.
54.99
Large Accessory Pocket
20" x 15.5" x 3"
4 lbs.
59.99
Caster Accessory Bag
12" x 9.5" x 3.5"
2 lbs.
64.99
Shock Absorber Kit
-
5 lbs.
84.99
28 Inch Support Rails
-
2 lbs.
84.99
Load Spreaders
-
6 lbs.
84.99
SKB TECHNICAL DOCOMENTS:  
Shockrack Load Spreaders   Installation  
Shockrack Additional Shock Absorbers  Installation  
Shockrack Support Rail   Installation  
Drawing 3SKB-R904U28
Drawing 3SKB-R906U28
Drawing 3SKB-R908U28
Drawing 3SKB-R9010U28
About SKB